Roland FP-4

62
Saving Your Favorite Performance Settings
Here’s how an entire set of registrations you saved in internal memory can be loaded
back to the [Registration] button.
Note that when you load a registration set, all of the settings that were stored at the
[Registration] button will be overwritten and lost.
fig.Panel-RegistLoad.eps
1.
Press the [Function] button.
2.
Press the Track [R] button.
3.
While holding down the Track [R] button, use the [-] [+] buttons to get the
following indication.
fig.d-Registload.eps
4.
Use the [-] [+] buttons to select the number of the registration set that you
want to load.
If no registration set has been saved in internal memory, “- - -” is shown in the display.
Loading the Registration Set
5.
Press the [Rec] button.
The registration set will be loaded to the [Registration] button.
Never turn off the power while settings are being loaded. If you do so, the FP-4’s
internal memory will be destroyed, rendering it unusable.
Loading a Registration Set You Saved
NOTE
NOTE
NOTE
FP-4-e.book 62 ページ ２００７年５月２４日 木曜日 午後７時１０分