60
Saving Your Favorite Performance Settings
Here’s how the twenty-four registrations stored with the [Registration] button can be
saved in internal memory as a single set.
fig.Panel-RegistLoad.eps
1.
Press the [Function] button.
2.
Press the Track [R] button.
3.
While holding down the Track [R] button, use the [-] [+] buttons to get the
following indication.
fig.d-Registsave.eps
Selecting a Place to Store the Registration Set
4.
Use the [-] [+] buttons to select the storage destination.
A dot “.” is displayed following numbers in which a registration set has already been saved, as
shown below.
fig.d-001+.eps
If you select a number in which a registration set has already been saved, the previously saved
registration set will be erased. If you don’t want to delete the previously saved registration set,
select a number for which a dot “.” is not displayed after the save-destination registration number.
Saving a Registration Set
FP-4-e.book 60 ページ ２００７年５月２４日 木曜日 午後７時１０分
To Next Page
Loading...
