43
Performing
You can use the equalizer to adjust the tonal quality.
This allows you to adjust the tonal character by boosting or decreasing the low-frequency
or high-frequency portions.
fig.Panel-Equalizer.eps
1.
Press the [Equalizer] button so it’s lit.
The equalizer will be turned on, and the tonal character will change.
Turning Off the Equalizer
1.
Press the [Equalizer] button so its light is turned off.
You can switch the equalizer settings to apply different changes to the tonal character.
The FP-4 provides four equalizer settings.
1.
While holding down the [Equalizer] button, press the [-] or [+] button to
select the equalizer type.
fig.d-1.eps
You can make more exacting changes to the equalizer settings. Please refer to the
“Changing the Equalizer Settings” (p. 85).
Changing the Tonal Quality (Equalizer)
Changing the Equalizer Type
Setting
Description
1
The high frequencies will be boosted, producing a bright, sparkling sound.
2
The high frequencies will be restrained, producing a more mellow sound.
3
The low-mid frequencies will be boosted, producing a powerful sound.
4
This setting is suitable for piano solos.
FP-4-e.book 43 ページ ２００７年５月２４日 木曜日 午後７時１０分
To Next Page
Loading...
Need help?
General
