73
Recording
Starting Recording
3.
Press the [Play] button.
After two measures of count sound, recording begins.
Recording starts when you start playing the keyboard (without pressing the [Play] button). In this
case, a count is not sounded.
When recording begins, the [Rec] button and [Play] button will light.
During the count-in, the count measure is indicated in the display as “-2” then “-1.”
Stopping Recording
4.
Press the [Play] button.
Recording will stop.
If you record without erasing the existing song, the song tempo, time signature, and
metronome settings will remain as they were for the first recording.
Listening to the Recorded Performance
5.
Press the [-] button to return to the beginning of the song you recorded.
6.
Press the [Play] button.
The recorded performance will play back.
7.
Press the [Play] button once again to stop playback.
The recorded performance will disappear when you turn off the power. If you want to
keep the performance you recorded, you must save it in internal memory. Refer to
“Saving the Songs You Record” (p. 76).
You can save your recorded songs on an external sequencer or computer. Refer to
“Connecting to MIDI Devices” (p. 99) and “Connecting to a Computer via the USB
(MIDI) Connector” (p. 98).
NOTE
NOTE
FP-4-e.book 73 ページ ２００７年５月２４日 木曜日 午後７時１０分
To Next Page
Loading...
Need help?
General
