Roland FP-E50 - Changing the Metronome Settings (Metronome); Starting the Metronome; Using the Metronome (Metronome)

2424
You can play this instrument while listening to a metronome. The
metronome’s tempo and time signature can be changed.
If a song is playing, the metronome sounds at the tempo and time
signature of that song.
Starting the Metronome
Here’s how to start the metronome.
1. Press the [Metronome] button.
The metronome plays, and the [Metronome] button lights up in time with
the time signature.
Beat Button illumination
First beat Lights up red.
Other beats Lights up white.
2. To stop the metronome, press the [Metronome] button
again.
Changing the Metronome Settings
(Metronome)
Here’s how to change the metronome settings.
1. Long-press the [Metronome] button.
The Metronome screen appears.
2. Use the [
ää
] [
åå
] buttons to select the parameter, and
then use the [Dec] [Inc] buttons to change the value.
Parameter Value Explanation
Beat
2/2, 3/2, 2/4,
3/4, 4/4, 5/4,
6/4, 7/4, 3/8,
6/8, 8/8, 9/8,
12/8
Changes the beat (time signature)
of the metronome.
* You can’t change the beat while a style is
playing back.
Down Beat OFF, ON Adds an accent to the downbeats.
Pattern
OFF,
,
, ,
, ,
,
Changes the metronome’s pattern.
Parameter Value Explanation
Volume 0–10
Changes the volume of the
metronome.
Tone
Click,
Electronic,
Voice (Jp),
Voice (En)
Changes the metronome’s sound.
3. If you want to save the setting, press the [Scene]
button.
If you decide to cancel, press the [Exit] button.
This exits the settings and closes the Metronome screen.
Using the Metronome (Metronome)