Roland FP-E50 - Saving a Scene (Scene Write)

Scene
2727
Saving a Scene (Scene Write)
If you select a dierent scene or turn o the power after editing the
settings, the edited settings are lost. If you want to keep the data, you
must save it.
1. Long-press the [Scene] button.
The Scene Write screen appears.
2. Use the [Dec] [Inc] buttons to select the scene that you
wish to write to, and press the [Enter] button.
The Rename screen appears.
Rename screen operations
Controller Explanation
[
ç
] [
æ
] buttons
Moves the cursor.
[
ä
] [
å
] buttons
Toggles between uppercase/lowercase.
[Dec] [Inc] buttons Change the character.
[1] ([Piano]) button Deletes a single character.
[2] ([E.Piano]) button Inserts a single character.
[Exit] button
Stores the name in memory that’s being
edited, and returns to the Destination select
screen.
[Enter] button A confirmation message appears.
3. Once you’ve entered the scene name, press the [Enter]
button.
A conrmation message appears.
If you decide to cancel, select “Cancel” and press the [Enter] button.
4. Use the [
çç
] [
ææ
] buttons to select “OK”, and then press
the [Enter] button.
Once the data is saved, the message “Completed!” is shown and the display
returns to the previous screen.