Roland FP-E50 - (Chord Pattern View Screen); Checking the Chord Pattern; Editing a Chord Pattern (Edit Menu)

Using the Chord Sequencer
3939
Checking the Chord Pattern
(Chord Pattern View Screen)
You can check the contents of the chord patterns on the Chord
Pattern View screen.
1. Long-press the Chord Sequencer [Select] button.
The Chord Pattern View screen appears.
Press the [Dec] and [Inc] buttons to change the number of measures
shown.
You can use the [Dec] [Inc] buttons to zoom in and out on the screen.
While the chord sequencer is stopped, you can use the [
ä
] [
å
] [
ç
] [
æ
]
buttons to move the position.
MEMO
On this screen, press the [Enter] button to display the Edit Menu.
For details, refer to “Editing a Chord Pattern (Edit Menu)” (p. 39).
2. Press the [Exit] button to return to the previous screen.
Playing Back a Chord Pattern from a Specic
Measure
1. While the chord sequencer is stopped, you can use the
[
ää
] [
åå
] [
çç
] [
ææ
] buttons to select the desired measure.
To reset the measure where playback starts to the beginning, long-press
the [Start/Stop] button. This works during playback or when the chord
sequencer is stopped.
2. Play the chord pattern.
Editing a Chord Pattern (Edit Menu)
1. Long-press the Chord Sequencer [Select] button.
The Chord Pattern View screen appears.
2. Press the [Enter] button.
The Edit Menu appears.
3. Use the [
ää
] [
åå
] buttons to select an item, and press the
[Enter] button.
Item (Edit Menu) Explanation
Write
(Chord Pattern Write)
Saves the chord pattern as a user pattern.
Chord
(Chord Edit)
Configures the chord-related settings.
Variation
(Variation Edit)
Sets the Variation and Activity Level.
Intro/Ending/Loop
Sets the intro, ending and loop-related
settings.
Undo/Redo
Undoes the edit you just made and returns
to the previous state.
Measure Configures the measure-related settings.
Transpose Sets the transposition.
Initialize Pattern Initializes the pattern.
Saving a Chord Pattern (Chord Pattern Write)
1. Use the Edit Menu to select “Write”, and then press the
[Enter] button.
The Chord Pattern Write screen appears.
2. Use the [
ää
] [
åå
] buttons to select where to save the
pattern (the write destination), and press the [Enter]
button.
The Rename screen appears.