Roland FP-E50 - Configuring the MIDI Transmit Channel Settings (MIDI Setting)

Editing a Scene (Scene Edit)
6565
Conguring the MIDI Transmit Channel
Settings (MIDI Setting)
Here’s how to specify the MIDI transmit channel.
1. On the Scene Edit screen, use the [
ää
] [
åå
] buttons to
select “MIDI Setting” and press the [Enter] button.
The MIDI Setting screen appears.
2. Use the [Dec] [Inc] buttons to change the value.
Parameter Value Explanation
MIDI Transmit
Ch.
OFF, 1–16 Specifies the MIDI transmit channel.
3. If you want to save the edited settings, execute the
Write operation.
Ø “Saving a Scene (Scene Write)” (p. 27)
MEMO
If you switch to a dierent scene, or turn o the power after editing the
settings, the edited settings are lost. If you want to keep the data, you
must save it.