Roland FP-E50 - Exploring FP-E50 Musical Features; Selecting Instrument Tones; Auto-Accompaniment Style Selection

Getting Ready to Play
66
Attaching the Music Rest
1. Insert the music rest into the slit on the top of the
FP-E50.
NOTE
¹ When moving the FP-E50, be sure to remove the music rest as a safety
precaution.
¹ Do not apply excessive force to the music rest.
¹ The music rest is not designed to accept the placement of laptops or
other heavy objects.
Connecting the Pedals
Connecting the Included Pedal Switch
You can use this as a damper pedal.
1. Connect the included pedal switch (DP-2) to the Pedal
1 jack on the rear panel.
Pedal Switch
MEMO
You can connect the DP-10 (sold separately), which features half-damper
support.
Connecting the Dedicated Pedal Unit (KPD-70)
When using the dedicated stand (KSFE50, sold separately), you have
the option of connecting the dedicated pedal unit (KPD-70, sold
separately).
For details, refer to “KPD-70 Owner’s Manual (Installing the Pedal
Board)”.
Connecting the Expression Pedal
Connect the expression pedal to add expressiveness to your
performance.
1. Connect the expression pedal (EV-5, sold separately) to
the Pedal 1 jack on the rear panel.
Expression Pedal
* Use only the specied expression pedal. By connecting any other
expression pedals, you risk causing malfunction and/or damage to
the unit.