Roland System-8 - Overall Settings for the SYSTEM-8; Accessing the MENU Screens; Making System Settings (SYSTEM); Saving the System Settings

19
Editing a Performance
In the case of the PATCH WRITE screen
To:SYS8 A-1[Ent]
[SY System- aws]
In the case of the PERF WRITE screen
To:A-1 [Ent]
[Fat Split ]
6. Use the [VALUE] knob to select the save-destination.
7. Press the [ENTER] button.
A conrmation message appears.
In the case of the PATCH WRITE screen
Patch Write?
[Exit]:N [Ent]:Y
In the case of the PERF WRITE screen
Perform Write?
[Exit]:N [Ent]:Y
8. To save, press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
When saving is nished, the screen indicates “Completed!”
Completed!
9. Repeat steps 1–8 to save the necessary edited data,
in the order of rst the patch(es) (upper, lower) and
then the performance.