Roland Texart XT-640 Setup Guide

4. Assembly and Ink Filling
12
|
Adjust the installation width of the stand legs to match the stand stay attachment holes
with the stand leg attachment positions.
}
Tighten the bolts temporarily in the four locations on the side and then in the four
locations on the top in the order of
, .
Stand stay
Tabletop
plate
Position the
surface with
attachment
holes toward the
tabletop plate.
Stand stay at-
tachment part
Tighten temporarily
Bolts: 8
Washers (black): 8

Roland Texart XT-640 Specifications

General

Brand	Roland
Model	Texart XT-640
Category	Printer
Language	English