Rosemount SOLU COMP II - Page 35

MODEL SOLU COMP II SECTION 5.0
PROGRAMMING THE ANALYZER
5.11.2 Procedure: Changing Screen Contrast
1. Press MENU. The main menu screen appears. Choose Display.
2. Choose Contrst.
3. Press " or ' to increase or decrease the screen contrast. As contrast
increases, the number increases.
4. The display returns to the screen shown in step 2. To return to the main
menu, press MENU. To return to the main display, press MENU followed
by EXIT.
Calibrate Hold
Program
DDiissppllaayy
Default Display
Units
CCoonnttrrsstt
Screen Contrast:
5500
28