40
MODEL SOLU COMP II SECTION 7.0
MAINTENANCE
Location in Shipping
Figure 7-2 PN Description Weight
1 note Screw, 6-32 x 1.38 in.
2 note Washer
3 23834-00 Enclosure, front, for pipe/surface mount version, 2 lb/1.0 kg
includes keypad and hinge
4 33655-00 Gasket for pipe/surface mount version 2 lb/1.0 kg
5 note Screw, 2-56 x 0.187 in., with integral washer
6 23822-00 Display board, LCD, Solu Comp II 2 lb/1.0 kg
7 23859-00 PCB, pH/conductivity, Solu Comp II 2 lb/1.0 kg
8 note Self-tapping screw, #4 x 0.375 in.
9 23863-00 PCB, power supply, 115/230 Vac, Solu Comp II 3 lb/1.0 kg
10 note Screw, 4-40 x 0.31 in., with integral washer
11 23896-00 Enclosure, rear, for pipe/surface mount version, 3 lb/1.5 kg
includes standoffs and hinge brackets, dual pH
not shown 23833-00 Surface mount kit; consists of four self-tapping 1 lb/0.5 kg
screws #6 x 1.75 in. and four O-rings
TABLE 7-2. Replacement Parts for Solu Comp II (Pipe/Surface Mount Version)
FIGURE 7-2. Exploded View of Solu Comp II (Pipe/Surface Mount Version)
Note: Size of screws and washers is for information only. Screws and washers cannot be purchased from Rosemount Analytical.
Shipping weights are rounded up to the nearest whole lb or 0.5 kg.
To Next Page
Loading...
