22. Press and release the ‘Work lamp’ switch.
• Check that the tailgate loading lamps and all
the work lamps fitted to the vehicle illuminate.
2748-DS003-OL1-D-GB-G2
Hyd Oil Temp 32
o
C
01.06.2013 09:00:00
0 No errors
0 No errors
0 No errors
23. Press and release the ‘Internal discharge controls’
switch.
• The screen should display the ‘Body discharge
internal controls’ mode.
2748-DS003-OL1-D-GB-G2
Hyd Oil Temp 32
o
C
01.06.2013 09:00:00
0 No errors
0 No errors
0 No errors
2748-DS004-OL1-D-GB-G2
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
32
o
C
01.06.2013 09:00:00
Hyd_Oil_Pressure 2 Bar
24. Check that ‘Tailgate clear’ pictogram is white, then
press and release the switch below it one or more
times so that the pictogram changes colour to
green and a white number from 1 to 4 appears in
the pictogram.
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
20
o
C
01.11.2012 09:00:00
Hyd_Oil_Pressure 1 Bar
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
20
o
C
01.11.2012 09:00:00
Hyd_Oil_Pressure 1 Bar
WARNING:
MAKE SURE THAT YOU KNOW THE HEIGHT
OF YOUR VEHICLE WITH THE TAILGATE
AND WASTE CONTAINER LIFTING DEVICE,
IF FITTED, RAISED.
DAILY CHECKS
3‑5
OM1R-SM-GB01R
3