Open system vehicles:
• Vehicles not fitted with light curtain.
• Vehicles fitted with light curtain and folding rave
rail in lower position.
57. Press and release the ‘Start pack cycle’ push‑
button.
• Packer plate should open and then stop.
58. Press and hold the ‘Start pack cycle’ push‑button.
• Carriage plate and packer plate should move
downwards.
59. Release the push‑button while the carriage plate
and packer plate are moving downwards.
• Carriage plate and packer plate should stop
immediately.
60. Press and hold the ‘Start pack cycle’ push‑button
again.
• Carriage plate and packer plate should
continue to move fully downwards from
stopped position and then stop when carriage
plate fully lowered.
61. Press and hold the ‘Start pack cycle’ push‑button
again.
• The packer plate should close.
Release the push‑button after the packer plate has
started to close.
• Packer plate should automatically close and
then the carriage plate and packer plate
should move upwards until the compaction
mechanism is fully packed when it should stop.
62. Press the ‘Signal’ push‑button.
• ‘Tailgate signal’ buzzer in the cab should
sound immediately the push‑button is pressed
and silence immediately the push‑button is
released.
• The ‘Signal’ warning pictogram should display
on the control panel screen while the button is
pressed.
DAILY CHECKS
3‑16
OM1R-SM-GB01R
3
To Next Page
Loading...
