On vehicles fitted with an external discharge control
panel carry out the following operations (69 - 78):
70. Press and release the ‘Internal discharge controls’
switch.
• The screen should display the ‘Body discharge
internal controls’ mode.
2748-DS003-OL1-D-GB-G2
Hyd Oil Temp 32
o
C
01.06.2013 09:00:00
0 No errors
0 No errors
0 No errors
2748-DS004-OL1-D-GB-G2
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
32
o
C
01.06.2013 09:00:00
Hyd_Oil_Pressure 2 Bar
71. Press and release the ‘External discharge controls’
switch.
• The screen should display the ‘Body discharge
external controls’ mode.
2748-DS004-OL1-D-GB-G2
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
32
o
C
01.06.2013 09:00:00
Hyd_Oil_Pressure 2 Bar
2748-DS005-OL1-D-GB-G2
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
09:00:00
Hyd_Oil_Pressure
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
32
o
C
01.06.2013 09:00:00
Hyd_Oil_Pressure 2 Bar
2748-DS031-OL1-D-GB-G2
WARNING:
MAKE SURE THAT YOU KNOW THE HEIGHT
OF YOUR VEHICLE WITH THE TAILGATE
AND WASTE CONTAINER LIFTING DEVICE,
IF FITTED, RAISED.
72. Press the ‘Tailgate raise’ push‑button.
• Tailgate should raise smoothly until out‑of‑
locks and then rotate smoothly upwards about
the hinge pins.
• ‘Vehicle reversing’ alarm should sound
immediately the tailgate is out‑of‑locks and
while tailgate is rising.
• ‘Tailgate out‑of‑locks’ pictogram should display
on the control panel screen.
DAILY CHECKS
3‑19
OM1R-SM-GB01R
3