ROTAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
Fig. 2
Cut off two pieces from the supplied fuel hose, each 300 mm.
TIP: Facilitate the assembly of fuel hose, by slightly widening the hose end with a circlip
plier.
Attention: Fuel hose can be damaged! Avoid excessive widening of the fuel hose.
Fig. 3
Fix one of the fuel hoses (pos. 1, Fig. 4) to the fuel outlet. The other end will be
connected later on the carburetor.
Note: Observe the arrow direction for the fuel inlet and outlet on the fuel pump housing.
Fig. 4
Page 5/53
Edition 07/2016
To Next Page
Loading...
