Rotax 912-UL - Page 12

5)
Dis-assembly
of engine
Anach
engine to trestle, drain
any
remaining
oil from
engine and
gearbox.
If fitted, remove
vacuum
pump.
5.1) Intake manifold:
Remove
the
4 Allen
hd.screws
M6
O and take off
intake manifolds
@ along with O-rings
and
pressure
equalizing
tube
0. Slacken
clamps
25/12
()
on coolant hose
@ between
accumulator
@ and 80" bends. O
=
crankcase
plug
screw of
tapped
hole for
crankshaft lock
screw