Effectivity: 915 i A Series
Edition 0 / Rev. 0
BRP-Rotax Page 1-11
December 01 2017
• To eliminate the risk of injury or damage, ensure any loose
equipment or tools are properly secured before starting the
engine.
• Allow the engine to cool at idle for several minutes before
turning off the engine.
Vacuum pump
• This engine may be equipped with a vacuum pump. The
safety warning accompanying the vacuum pump must be giv-
en to the owner/operator of the aircraft into which the vacuum
pump is installed.
Governor
• This engine may be equipped with a governor. The safety
warning accompanying the governor must be given to the
owner/operator of the aircraft into which the governor is
installed.
To Next Page
Loading...
