3
Rotork designs, manufactures, and tests
its products to meet many national and
international standards. For these products to
operate within their normal specifications, they
must be properly installed and maintained.
The following instructions must be followed and integrated
with your safety program when installing and using Rotork
products:
•
Read and save all instructions prior to installing, operating
and servicing this product
•
If you don’t understand any of the instructions, contact
Rotork for clarification
•
Follow all warnings, cautions and instructions marked on,
and supplied with, the product
•
Inform and educate personnel in the proper installation,
operation and maintenance of the product
1. Introduction
Linear CML Rotary CMRQuarter-Turn CMQ
•
Install equipment as specified in Rotork installation
instructions and per applicable local and national codes.
Connect all products to the proper electrical sources
•
To ensure proper performance, use qualified personnel to
install, operate, update and maintain the unit
•
When replacement parts are required, ensure that the
qualified service technician uses replacement parts
specified by Rotork. Substitutions may result in fire,
electrical shock, other hazards, or improper equipment
operation
•
Keep all product protective covers in place (except
when installing, or when maintenance is being performed
by qualified personnel), to prevent electrical shock,
personal injury or actuator damage
•
Operation of actuator in an inappropriate fashion
may cause harm or damage to unit or other equipment
surroundings
A4US
US
A4
US A4
US
A4
A4 US
US
A4
US
A4
A4 US
To Next Page
Loading...
Need help?
General
