RTW TM3-Primus User Manual

2 | Installation | 2.2 | Connect SignalsEN-26
Manual | TM3-Primus
10. Adapt the buffer depth using the RTW TM3 Primus Control Panel.
It can be displayed with a click on the RTW icon located at the info
section of the Windows task bar.
11. Check that the displayed current sample rate on the Status tab mat-
ches to the corresponding settings of your DAW.
12. Select a format on the Format tab.
13. Adapt the USB Buffer and the ASIO Buffer size on the Buffer
Settings tab. We recommend to set the USB buffer depth to “relaxed”
(8 ms) and the ASIO buffer depth to “512 Samples”.
14. Adjust the output volume on the Volume tab if needed. After this,
TM3-Primus is ready for operation.

RTW TM3-Primus Specifications

General

Brand	RTW
Model	TM3-Primus
Category	Measuring Instruments
Language	English