3 | Operation | 3.4 | Loading vertical and horizontal Presets EN-32
Manual | TM3-Primus
Switch to Vertical Display Mode
1. During normal operation wipe across the touchscreen with your fi nger
in vertical direction of the lying unit. The display changes from horizon-
tal to vertical orientation.
2. Place the display unit in its upright position again.
NOTE - Please note that the TM3-Primus recognizes the wipe
orientation (lengthwise or crosswise) in order to switch between vertical
and horizontal display modes. It doesn‘t use a motion sensor for this.
To Next Page
Loading...
