Ruijie RG-S5750-H Series User Manual

Hardware Installation and Reference Guide Product Overview
35
Hot Swapping
Supports to disconnect one redundant power module from the outside
power supply system, plug and unplug power modules while the device is
powered on.
Power Supply Alarm
Alarms power supply faults through the power status LED.
LED
LED
Panel Identification
State
Meaning
Status
LED
OUT
Off
There is no power output or output error occurs.
On
Output is OK.
1.1.4 RG-M5000E-AC500P
Specification
Power Model
RG-M5000E-AC500P (AC input)
RG-M5000E-AC500P (HVDC input)
Device Model
RG-S5750-48GT4XS-HP-H
RG-S5750-24GT4XS-HP-H
RG-S5750-48GT4XS-HP-H
RG-S5750-24GT4XS-HP-H
Rated Voltage
100 V to 240V
50/60 Hz
240 V
Maximum
Voltage
90 V to 264 V
50/60 Hz
192 V to 288 V
Power
Single power supply: 370 W for PoE.
Dual power supplies: 740 W for PoE
Input Current
≤3.5mA
Hot Plugging
Supported
Power
Redundancy
1+1 redundancy (PoE is smaller than 370 W)
Over Voltage
Protection
54 V: -57 V to -60 V
12 V: 13.4 V to16 V
Over Current
Protection
54 V: 8 A to 10 A
12 V: 12 A to16 A
Over
Temperature
Protection
Supported
Current Sharing
Supported
Mixed Power
Utilization
Mixed use with RG-M5000E-DC500P is supported
Power Cord
10 A power cord
Power Dimension
(L x W x H)
195.4 mm * 90 mm * 40 mm (without connection finger and bracket)
224.5 mm * 90 mm * 40 mm (with connection finger and bracket)
Weight
0.9 kg
Altitude
0 m to 5,000 m
The HVDC input of the RG-M5000E-AC500P power module is only applicable to the Chinese region.

Ruijie RG-S5750-H Series Specifications

General

Brand	Ruijie
Model	RG-S5750-H Series
Category	Switch
Language	English