RUKO F11PRO 2 - Page 26

F11PRO 2 User Manual
- The gimbal will not function and may appear tilted before it is
powered on and completes its self-check. This is normal. Once
powered on, the gimbal will automatically perform a self-check,
which takes about 20 seconds. After the self-check, the gimbal will
stabilize and level itself automatically.
Before power on and
self-check
(Non-operational state)
After powering on and
completing the self-check
(operational state)
3.6.2 The aircraft adjustment angle is -90° to 0°
024 Ruko Al Rights Reserved.