Ryze trek - Setting Ring Volume; Setting Vibration Strength; Do Not Disturb Mode

15
1) Press the smartwatch button to open the
applications list on the watch home screen.
2) Tap Settings. Tap Sounds and Vibration. Tap to
toggle the Silent Mode switch on or o.
2.4.7 SETTING RING VOLUME
1) Press the smartwatch button to open the
applications list on the watch home screen.
2) Tap Settings. Tap Sounds and Vibration. Tap Ringer
Volume and adjust the volume bar.
2.4.8 SETTING VIBRATION STRENGTH
1) Press the smartwatch button to open the
applications list on the watch home screen.
2) Tap Settings. Tap Sounds and Vibration. Tap
Vibration Strength. Swipe screen to pick an option
and tap
to save the setting.
2.4.9 DO NOT DISTURB MODE
The Do Not Disturb (DND) mode will mute all incoming
calls, notifications and the timer, but not alarms.
The smartwatch will also not vibrate when receiving
incoming calls and notifications.
Setting the DND mode with the watch
Method 1:
Swipe down on the watch home screen to reveal the
quick settings panel. Tap
to toggle the feature on
or o.
Method 2:
Press the smartwatch button to open the applications
list on the watch home screen. Tap Settings. Tap DND
Mode. Tap to toggle the All-day DND switch on or o.
For scheduled operations, turn on the Scheduled DND
switch, set the start time and end time, and tap
to
save the setting.
Setting DND mode with the Ryze Connect App
Open the App and go to the Device tab. Tap More
Settings. In the following screen, slide the switch to
toggle the feature on or o and adjust the timings.
Tap
in the upper right to confirm your selection.