Ryze trek - Power Saving Mode; Powering Off, Restarting and Resetting

16
2.4.10 POWER SAVING MODE
Entering power saving mode
Method 1:
Swipe down on the watch home screen to reveal the
quick settings panel. Tap
battery icon to toggle the
feature on or o.
Method 2:
Press the smartwatch button to open the applications
list on the watch home screen. Tap Settings. Tap
Battery Level. Tap Enter Power Saving Mode. Tap
to
confirm selection.
Exiting power saving mode
Press and hold the side button.
2.4.11 POWERING OFF, RESTARTING AND RESETTING
Powering o the smartwatch
From the watch home screen, go to Settings > General
> Power O and tap
to confirm selection.
Restarting the smartwatch
Method 1:
From the watch home screen, go to Settings > General
> Restart and tap
to confirm selection.
Method 2:
Open the App and go to the Device tab. Tap the watch
icon. In the following screen, tap Restart the device and
follow the prompts to confirm selection.
Method 3: Force restarting the smartwatch
Press and hold the smartwatch button for at least 8
seconds and release the button after the screen turns
o. The smartwatch will automatically restart, and the
home screen will appear after a short while.
Resetting the smartwatch
NOTE
Please note that once your smartwatch is reset, it will restore
to its factory settings and all existing data will be deleted. The
smartwatch will also be unpaired from your smartphone.