43
2.23 TIMER
You can set a timer with preset duration or customised
duration on the watch.
Setting a preset timer
1) Press the smartwatch button to open the applications
list on the watch home screen. Tap Timer.
2) Swipe the screen to view options. Tap on a preset
time to start a timer. Tap
to pause timing. Tap
to resume timing. Tap
to stop timing.
Setting a customised timer
1) Press the smartwatch button to open the
applications list on the watch home screen.
Tap Timer.
2) Swipe down the screen. Tap to set a customised
duration. Swipe the screen to adjust time settings
and then tap
to start timing. Tap to pause
timing. Tap
to resume timing. Tap to stop
timing.
2.24 WORLD CLOCK
Setting the clock with the Ryze Connect App
1) Open the Ryze Connect app and go to the Device
tab. Tap More Settings. Tap World Clock. Tap Add.
Tap to select a city. Tap
at the upper left to save
the clock setting.
2) To modify a clock setting, tap Edit. To delete a clock
setting, swipe the clock tab to the left and then tap
the bin logo. Tap Done to save the setting.
Viewing world clock with the smartwatch
1) Open the applications list in the watch home screen
by pressing the smartwatch button. Tap World Clock.
Swipe down the screen to reveal more data. Tap on
a city name to view its sunset and sunrise times.
59 0013
00 0114
01 0215
00 00 23
World clock
03 25
25/05 WED
PM
06 00
06 00
-8H PM
BEIJING
Numbai
03 25
03 25
World clock
World clock
03 25
25/05 WED
PM
06 00
06 00
-8H PM
BEIJING
Numbai
03 25
03 25
World clock
3.0 RYZE CONNECT APP
The Ryze Connect App is a free app that allows
you to manage and control various features of the
smartwatch from your smartphone. The App supports
watch settings, data updates, data synchronisation,
data analysis, data reporting and data sharing with
selected third-party apps.
It is recommended that you connect your smartwatch
to the App as frequently as possible for the best
smartwatch user experience.
From time to time, we will add improvements to the
smartwatch and enhance App functionality. For the
latest updates on our products including this manual,
please visit www.ryzeabove.com.au and
www.ryzeabove.co.nz
3.1 SYNCING WITH THE SMARTWATCH
Open the Ryze Connect App and go to the Device
tab and check that the watch is connected. Go to
the Home tab. To sync the smartwatch data with the
App, swipe down the middle of the phone screen
and release your finger when you see
Pull Down to
Synchronise Data.
3.2 UPDATING THE SMARTWATCH SOFTWARE
It is recommended that you check the App regularly
for software updates with the smartwatch. To check
for updates and install them, please follow the steps
below:
1) Ensure that the smartwatch battery level is more
than 30%. If not, please recharge the smartwatch.
2) Keep your smartwatch and smartphone close to
each other and ensure that they are still.
3) Open the Ryze Connect App and go to the Device
tab. Ensure that your smartphone and smartwatch
are connected via Bluetooth. Tap on the watch icon.
In the following screen, tap Device Update. Follow
the prompt to complete installation. The updating
process may take up to a few minutes to complete.
To Next Page