7
1.4 CHARGING AND POWERING ON
1.4.1 CHARGING
Please fully charge the smartwatch before first use.
1) Align and attach the supplied magnetic charging
cable to the magnetic contacts at the back of the
smartwatch.
2) Connect the other end of the magnetic charging
cable to a USB port of a computer, or a standard
adaptor with a DC output voltage of 5V and an
output current not exceeding 0.5A that complies with
safety standards as well as national and local laws
and regulations.
3) The charging icon will appear on the watch screen
after a short while. When the watch is fully charged,
the charging indicator will display 100%. The watch
and charger may become slightly warm during
charging. Detach the smartwatch from the magnetic
charging cable once it is fully charged and allow the
smartwatch to cool down.
To Next Page
Loading...