32
it is snug on your wrist. During the measurement, keep
your arm and wrist still and wait patiently until the
measurement finishes.
2.10.1 MANUAL HEART RATE MEASUREMENT
From your smartwatch home screen, swipe left to view
the health check tile. Tap
to start measuring. Refer
to the chapter ‘One-Click Health Check’ for more
information.
Alternatively, open the Heart Rate application on the
smartwatch and wait patiently until the measurement
finishes.
2.10.2 CONTINUOUS HEART RATE MONITORING
To enable continuous heart rate monitoring, open
the Ryze Connect App and go to the Device tab. Tap
Health. Tap Heart Rate. In the following page, turn on
the switch for Continuous Heart Rate Measurements.
Tap
to save the setting.
Heart rate will be measured in real time during
a Workout session regardless of the setting for
Continuous Heart Rate Measurements in the App.
Please take note that continuous heart rate
monitoring will increase battery consumption with your
smartwatch.
2.10.3 SETTING HIGH HEART RATE ALERT
Open the Ryze Connect App and go to the Device tab.
Tap Health. Tap Heart Rate. In the following page, turn
on the switch for High Heart Rate Alert. Tap Limit Value
to set a value for the alert. Tap
to save settings. After
the feature is turned on, you will receive an alert on the
watch when the detected heart rate rises above the set
value for 10 minutes whilst you appear to be inactive.
2.10.4 SETTING LOW HEART RATE ALERT
Open the Ryze Connect App and go to the Device tab.
Tap Health. Tap Heart Rate. In the following page, turn
on the switch for Low Heart Rate Alert. Tap Limit Value
to set a value for alert. Tap < to save settings. After the
feature is turned on, you will receive an alert on the
smartwatch when the detected heart rate falls below
the set value for 10 minutes whilst you appear to be
inactive.
To Next Page
Loading...