EasyManua.ls Logo

Saeco IDEA RST - Page 36

Saeco IDEA RST
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
8
36
On
Off
15.4 Coffee x2
On
Off
15.5 LARGE COFFEE
On
Off
15.6 AMERICANO/JUG
On
Off
15.7 macchiato
On
Off
15.8 Latte Macchiato
On
Off
15.9 Cappuccino
On
Off
15.10 Caffelatte
On
Off
15.11 milk
On
Off
15.12 FLAT WHITE Not selectable
On
Off
15.13 HOT WATER
On
Off
15.14 Power Steam
On
Off
16 Grinder Setup Set the counter method of the grinder turns.
16.1 Grinder Prescaler
If the value is 0, the grinding stops when it reaches the number of the actual turns set in the “Grinder Setting” option.
Otherwise, the grinding stops at a given time.
The value set shows the number expressed in milliseconds that will be multiplied by the value set in the “Grinder Setting” options to
determine the grinding time.
0…60
17 KEYBOARD OVERLAY If activated, the keyboard overlay displays the current reading of each of the 16 buttons, the target option and the difference between the two values.
Deact.
The circle next to the reference button shows whether the button is activated.
Act.
WASHING MENU
OPTION NO.
DISPLAY Description
1. Cappuccinatore Rinsing This function allows dispensing a quantity of steam to avoid the building up of deposits in the Cappuccinatore.
2. CLEAN BREWING UNIT This function allows dispensing a minimum quantity of hot water (about 5 cc) to avoid the building up
of deposits in the coffee dispensing spout.
3. GROUP RINSING This function allows to wash the brew group by using the special tablets