Sam4s ER-265EJ - Page 120

120 • Program Mode Programming Sam4s ER-260EJ/256EJ OP Manual v1.20
Group Programming - Reference Information
# Option Entry Description
1 DESC
Alpha numeric
24 character
You can program a descriptor for each group. Type the
descriptor using the Program Overlay or by using the
descriptor code method (see page 104.). The overlay is
automatically activated when the cursor is pointing at the
DESC field. The default descriptors are GROUP 01,
GROUP 02, etc.
2 ADD TO GROUP TOTAL Y or N
Select N if you do not wish this groups total to be added
to the total of all groups on the Group report.
3 SEND TO KP Y or N
Select Y if you wish to send PLU’s reporting to this
group to a kitchen printer.
4 KP PORT #: RECEIPT Y or N
Select Y if you wish to print a kitchen requisition at the
register.
5 KP PORT #: 1 Y or N
Select Y if you wish to print a kitchen requisition at the
Port1.
6 KP PORT #: 2 Y or N
Select Y if you wish to print a kitchen requisition at the
Port2.
7 KP PORT #: 3 Y or N
Select Y if you wish to print a kitchen requisition at the
Port3.
8 PRINT RED ON KP Y or N
Select Y if you wish items reporting to this group to print
in red on the kitchen printer. (Note, the kitchen printer
must have red/black printing capability, and this option
does not apply to the register receipt printer.)
9 GIFT CARD Y or N