Sam4s ER-265EJ - No Sale Function Options

Sam4s ER-260EJ/256EJ OP Manual v1.20 Program Mode Programming • 123
#/No Sale Function Options
Option Entry Description
1 DESC1
Alpha numeric
24 character
You can program a unique descriptor for the no sale function.
The default descriptor is NOSALE.
2 DESC2
Alpha numeric
24 character
You can program a unique descriptor for the non-add #
function. The default descriptor is NON ADD #.
3
NO SALE KEY
DISABLE
Y or N
Select Y to disable the no sale function (non-add entries are
allowed).
4
UNDER MANAGER
CONTROL
Y or N Select Y to allow operation only in manager operation mode.
5
INHIBIT NO SALE
AFTER NON-ADD #
Y or N
Select Y if you want to disable the NO SALE function after a
non-add number is entered.
6
COMP. # AT START
OF SALE
Y or N
Select Y if you wish to enforce the entry of a non-add number
at the beginning of each transaction. (For example: to track the
number of customers in each sale or to identify a customer
number with each sale.)
7 PRINT ON N/S Y or N Select N to stop printing when a NO SALE is performed.
8
NON-ADD #
PROHIBIT
Y or N Select Y to disable the non-add # function.
9
COMP NON-ADD #
MUST MATCH MAX
DIGIT
Y or N
Select Y if you wish all non-add number entries to have the
exact number of digits selected in the MAX DIGIT flag below.
10 MAX DIGIT (0-8) 0-8
Enter the maximum number of digits for non-add number
entry. Zero (0) means no limit.