Sam4s ER-265EJ - Manager Mode (X Mode) Functions

Sam4s ER-260EJ/256EJ OP Manual v1.20 Manager Mode (X Mode) • 67
Manager Mode (X Mode)
Overview
All Management Functions take place with the control lock in the X or Z position. In this way, only
those with the correct key will have access to these functions. Some register operations may be
programmed to require the control lock in the X position to allow the operation. All reports require a
key that will access the X or Z position.
The following procedures are done from the Manager Mode (X mode) menu:
 Manager Mode Required Operations
 X Reports
 Flash report
 Save Report to SD Card
 Declaration
 Set Training Mode
 Program Stock Entry
 Receipt On or Off