Sam4s ER-265EJ - Memory Clear Options

Sam4s ER-260EJ/256EJ OP Manual v1.20 Service Mode Programming • 87
Memory Clear
Before you use your ER-260EJ/ER-265EJ for the first time, you must perform a memory all clear to
ensure that all totals and counters are cleared and that the default program is installed. Go to
“Clearing Memory” on page 27 to complete this procedure.
From the Service Mode menu, you can clear selected area of memory without clearing memory
entirely.
1. Move the key to the S lock position to display the Service Mode menu.
2. From the Service Mode menu press the CHARGE1 key until “MEMORY
CLEAR” is selected (or press 2 to view the option directly.)
3. Press CASH. The first option of the Memory Clear menu displays;
MEMORY CLEAR
1.CLEAR TOTAL
4. There are six memory clear options available:
 Clear Total - Clears all totals and counters, including the grand total.
 Clear Grand Total - Clears only the grand total.
 Clear PLU - Clears the entire PLU file, including totals, counters and
programming.
 Clear Price=0 - Clears all PLU’s programmed with a zero price.
 Edit Counters - Allows edits of some counters and totals: Z counter, Receipt
No, Grand Total and Train Grand Total.
 Clear Non Mover - Clears the entire PLU file that have not sold, including
totals, counters and programming.
5. You can now use the CHARGE1 and the CHARGE2 keys to scroll up and down
through the Self Test menu. Or, if you already know the menu number of the Service
Mode function you with to perform, you can enter the digit (1-6) directly.
6. Press CASH to clear. Follow instructions on the display to complete the action.