Sam4s ER-260EJ/256EJ OP Manual v1.20 Integrated Payment Appendix • 197
Note: Visa or MasterCard branded Debit cards used for PIN Debit may also be used like credit cards,
with just a signature. If a Debit card presented for a PIN Debit transaction fails to read, when the
CARD ERROR message appears, press CLEAR. You can now choose an alternative payment
method. Press the CREDIT function. Slide the same Debit card, if it fails to read again, select
CLEAR. The message “ENTER ACCT NO” displays. You can manually enter the account number
and complete the transaction. The merchant may pay different card fees for PIN Debit and signature
Debit transactions.
**Note: The option to require CCV number or Zip Code entry are set by the processor. Your
installation may not require this entry.
Merchandise Return
Complete the merchandise return transaction as you would a normal transaction. Press MDSE
RTRN prior to entering each returned item.
1. Register a normal transaction.
2. Press the appropriate CHARGE key. The message “WAITING FOR EFT” displays on the
register:
3. At the PIN-Pad the message displays:
REFUND
$10.00 – OK?
4. Press the GREEN button on the PIN-Pad keypad.
5. Insert the EMV card into the PIN-Pad. The PIN-Pad will display “PLEASE WAIT”, then
“DO NOT REMOVE CARD”, and then “PROCESSING”. When Complete, the
“APPROVED” message will display.
6. Remove the card from the PIN-Pad.
7. At the register, the message “PRESS CASH TO CONTINUE” will display.
8. Press CASH. The receipt and card draft are printed.
9. If multiple documents are to be printed, the message “PRESS CASH TO CONTINUE”
displays. Tear off the printer paper, and press CASH to resume printing.
To Next Page
Loading...
