Sam4s ER-260EJ/256EJ OP Manual v1.20 Service Mode Programming • 95
Read Carefully: Store Name Notes
The store name you set on “STORE NAME” page 142 (system option 36) is used to identify program
and report data on the SD card. Note that the default store name is “STORE001”.
If you are using the SD Card to move information to a PC or use the program or report data with the
PC Utility, you must pay close attention to the store name. Do not use characters such as “-” or “/”
that cannot be used in naming a folder on your PC. If you use such a character in your store name,
you will not be able to read the files on your PC.
The Store Name field is 8-characters in length.
Program Backup
The ER-260EJ/ER-265EJ will write the backed-up program files to the folder:
ER-260EJ/ER-265EJ\STORENAME\PGMBACK
Below is an Explorer view of the backed-up files. In the example below, the store name is “SAM4S”.
To Next Page
Loading...
