Sam4s ER-260EJ/256EJ OP Manual v1.20 Integrated Payment Appendix • 215
8. Verify the sale amount; press the GREEN button on the PIN-Pad.
SALE
$3.00 – OK?
9. Insert the EMV card into the PIN-Pad. The PIN-Pad will display “PLEASE WAIT”, then
“DO NOT REMOVE CARD”, and then “PROCESSING”. When Complete, the
“APPROVED” message will display.
APPROVED
10. Leave the card in the PIN-Pad; the receipt and the customer copy of the EFT draft will print
on the ECR. Remove the card from the PIN-Pad.
11. At the register, the message “PRESS CASH KEY” will display.
12. Press CASH; the merchant copy of the EFT draft will print and the and the PIN-Pad will
prompt “REMOVE CARD”
REMOVE
CARD
13. If multiple documents are to be printed, the message “PRESS CASH TO CONTINUE”
displays. Tear off the printer paper
To Next Page
Loading...
