Sam4s ER-380F - Operation

3 Installation and Operation
3-4 SAM4S ER-380M/F SERIES
3-3 Operation
Note: Before using this Electronic Cash Register (ECR) for the first time, leave it powered ON in the REG mode
for a at least 24 hours. This allows the Ni-Cad battery, which maintains the ECR’s memory while the
power is OFF, to fully charge.
3-3-1 Mode Switch
The position of the Mode Key determines the action of the ECR. The modes are as shown in Table 3-3
Mode Function
VOID Use to void (correct) items outside of a sale.
OFF The Register is inoperable.
REG Use for normal registrations.
X
Use to read register reports and perform other manager
functions.
Z Use to read register reports and reset totals to zero.
PGM Use to program the register
Table3-3 Mode Switch Function
Figure3-4 Mode Switch
The mode switch can be used to access the following key lock positions.
Key Accessible Position Remark
VOID Void, Off, Register, Manager
X Off, Register, Manager
Z Off, Register, Manager, Clear Totals
PGM Void, Off, Register, Manager, Clear Totals, Program
Table3-4 Key Function
Note : The Key can be removed from the key lock in the OFF or REGISTER position.
REG
X
Z
PGM
OFF
V
OID