Samson 3730-4 - Page 33

EB 8384-4 EN 33
Attachment to the control valve – Mounting parts and accessories
10.1
1
2
1.1
1.2
6.1
6
7
8
10
9
9.1
11 11.1
3
12.1
9.2
9.3
Fig. 10 · Attachment to Type 3510 Micro-flow Valve
1 Lever
1.1 Nut
1.2 Disk spring
2 Follower pin
3 Follower plate
6 Connecting clamp
6.1 Seal rings
7 Pressure gauge bracket
8 Pressure gauge
mounting kit
9 Stem connector
9.1 Bracket
9.2 Pin
Note: Always use the connecting plate
(6) included in the accessories to connect
supply and output.
Never screw threaded parts directly into
the housing.
Lever S
9.3 Screws
10 Bracket
10.1 Screw
11 Hex bar
11.1 Screws
12.1 Screws