Samson 3730-4 - Page 99

Fault/diagnostic alarm
Value (hex) Status alarm acc. to
Profile 3.01
Perhaps larger than in original state TEST 0x80 GOOD_NON_SPECIFIC
Perhaps larger than original state 0x80 GOOD_NON_SPECIFIC
External leakage
Perhaps soon expected 0x80 GOOD_NON_SPECIFIC
Perhaps existing 0x80 GOOD_NON_SPECIFIC
Existing 0x80 GOOD_NON_SPECIFIC
Observing end position
Zero point shift monotonously downwards, average value above
reference lines
0x80 GOOD_NON_SPECIFIC
Zero point shift monotonously upwards, average value above
reference lines
0x80 GOOD_NON_SPECIFIC
Zero point alternating, average value above reference lines 0x80 GOOD_NON_SPECIFIC
Zero point shift monotonously downwards, average value below
reference lines
0x80 GOOD_NON_SPECIFIC
Zero point shift monotonously upwards, average value below
reference lines
0x80 GOOD_NON_SPECIFIC
Zero point alternating, average value below reference lines 0x80 GOOD_NON_SPECIFIC
Connection positioner/valve
No opt. travel transm. TEST 0x80 GOOD_NON_SPECIFIC
Perhaps loose 0x80 GOOD_NON_SPECIFIC
Perhaps limit. range 0x80 GOOD_NON_SPECIFIC
Perhaps loose TEST 0x80 GOOD_NON_SPECIFIC
Range
Mostly near closing position 0x80 GOOD_NON_SPECIFIC
Mostly near max. opening 0x80 GOOD_NON_SPECIFIC
Mostly closing position 0x80 GOOD_NON_SPECIFIC
Mostly max. opening 0x80 GOOD_NON_SPECIFIC
Temperature monitoring
Lower limit exceeded 0x80 GOOD_NON_SPECIFIC
Higher limit exceeded 0x80 GOOD_NON_SPECIFIC
Reference run
Reference test aborted 0x80 GOOD_NON_SPECIFIC
ESD
Movement actuator possible –> Masking redundant 0x80 GOOD_NON_SPECIFIC
EB 8384-4 EN 99
PROFIBUS-PA communication