Samson TROVIS 6400 - Three-Step Controller with Internal Feedback ( y = 1 ); Controlled Variable X as Recorder Input ( y = 2 )

6.1.2 Three-step controller with internal feedback (
Y
=
1
)
Controlled variable x can also be used as a recorder input.
— Open the
configuration level
(see page 17)
— Select the input signal via
In
— Determine the input range via
In__
and
In
—
— Determine the output signal via
Y
:
Y
=
1
, three-step controller.
— Determine the operating direction via
Yr
— Select the desired extended functions such as digital filter
InF
and temperature display in
°Fahrenheit
Int
.
—
Y1
and
Y2
cannot
be used as limit contacts here any more. Therefore, set both of these to
0
.
— Open the
parameterization level
(see page 14)
— Motor operating time via parameter
t1
Differential gap via parameter
tH
Enter dead band via parameter
td
— Optimize the plant by entering control parameters
P
,
I
,
d
and
dP
6.1.3 Controlled variable x as recorder input (
Y
=
2
)
Controlled variable x can be used as a recorder input. Switching outputs
Y1
and
Y2
are avail-
able as limit contacts.
— Open the configuration level (see page 17)
— Select the input signal via
In
— Determine the input range via
In__
and
In
—
— Determine the output signal via
Y
=
2
— Determine the operating direction via
Yr
— Select the desired extended function such as digital filter
InF
and temperature display in
°Fahrenheit
Int
— Alarm conditions can be selected for limit contacts
Y1
and
Y2
by means of configuration
blocks
Y1
and
Y2
, resp.
— Open the parameterization level (see page 14)
— Limit the output signal Y via
Y__
and
Y
—
— Enter the desired limit values for
1A
and
2A
— Enter the desired differential gap of the limit values via
1H
and
2H
, rep.
— Optimize the plant by entering control parameters
P
,
I
,
d
and
dP
30