40
Preparations
1
1 Preparations
Volume control
z Function
The volume of a TV/monitor can be adjusted using a PC.
z Viewing volume state (Get Volume Status)
z Setting the volume (Set Volume)
"Volume": Volume value code to be set on a TV/monitor (0-100)
z Ack
"Volume": Volume value code to be set on a TV/monitor (0-100)
z Nak
"ERR" : A code showing what error has occurred
Header Command
ID
Data length
Checksum
0xAA 0x12 0
Header Command
ID
Data length Data
Checksum
0xAA 0x12 1 "Volume"
Header Comma
nd
ID
Data length Ack/Nak r-CMD Val1
Checksu
m
0xAA 0xFF 3 ‘A’ 0x12
"Volume
"
Header Comma
nd
ID
Data length Ack/Nak r-CMD Val1
Checksu
m
0xAA 0xFF 3 ‘N’ 0x12 "ERR"
Downloaded From TV-Manual.com Manuals
To Next Page
Loading...
