Samsung 400BX - How Display Properties Are Shown When Multiple Displays Are Used

93
Using MDC
3
3 Using MDC
3.4.4 How display properties are shown when multiple displays are used
1 When no display is selected: The default value is displayed.
2 When one display is selected: Settings for the selected display are displayed.
3 When two displays are selected (e.g. in sequence of ID 1 and 3): The settings for ID 1 are displayed
before the settings for ID 3.
4 When the All+Select checkbox is checked and all displays are selected: The default settings are
displayed.
Downloaded From TV-Manual.com Manuals