Samsung 400BX - Page 82

82
Using MDC
3
3 Using MDC
Picture PC
To view the settings for each connected display, select a display one at a time. Selecting all displays by
clicking All+Select will display the default values.
Changing any setting in this menu will automatically switch the mode to Custom.
1 Picture PC
Only enabled for the PC, DVI input sources.
2 Contrast
Change the contrast for the selected display.
3 Brightness
Change the brightness for the selected display.
4 Red
Customize the red color for the selected display.
5 Green
Customize the green color for the selected display.
6 Blue
Customize the blue color for the selected display.
7 Color Tone
Change the color tone for the selected display.
5
6
7
8
9
10
2
1
3
4
Downloaded From TV-Manual.com Manuals