Samsung HD950 - Connection to a TV with Anynet Jack

ENG-19
Connections
CONNECTIONS
1
Using an Anynet cable, connect the Anynet Input (Green)
terminal on the rear side of the DVD player to Anynet Output
(Black) terminal of the TV.
2
Using an Anynet cable, connect the Anynet Output (Black)
terminal to Anynet Input (Green) terminal of other AV device.
3
Set up the Anynet function on the Samsung TV.
GREEN BLACK
BLACK
GREEN
DVD Receiver
AV Receiver
Set-Top Box
Recorder
GREEN
GREEN
GREEN
Connection to a TV with Anynet Jack
What is Anynet?
- Anynet enables you to control Samsung AV devices through the menu display on the TV screen,
using just the Samsung TV's remote control.
- This function works only with Samsung Anynet supported models.
- Using Anynet, you can easily control this DVD Player with your Samsung TV.
- For detailed operation steps and connections, refer to the Samsung TV Anynet user’s manual
- Please note that you need to set the Anynet on your Samsung TV to use the Anynet function.
Note
- Anynet operation is only available with Samsung TV sets that support Anynet.
- If Component (Progressive) or S-Video connection is used, some Anynet features will not be available. Use
Video/Audio cable for the connection.
- Anynet function will not operate when Input and Output terminals are connected improperly, because the TV
cannot communicate with external devices.
- Anynet terminals consist of Input (Green) and Output (Black) terminals.
- Match the color-coded cables to terminals when you connect the Anynet cable.
00627B-HD950-XAA-1 5/6/05 3:21 PM Page 19