Samsung HW-E5500 - Sound Modes and Audio Adjustments

28 English
Operation
English 29


Press the  button.
Each time you press this button,  will be selected in turn.
You can also select the 3D SOUND mode by pressing the  button on the remote
control.

The 3D sound effect will not be available for FM.

Press the  button.
Each time you press this button,     
will be
selected in turn.
You can also select the DSP/EQ mode by pressing the  button on the remote control.

The menu may vary depending on the region.
The DSP/EQ function is only available in Stereo mode.
The DSP/EQ function is not available while playing AC3 signal in 2.1 channel mode.

Press the button.
Each time you press this button,    will
be selected in turn.

You cannot use Dolby Pro Logic ll mode for Analog multi channel signals.
Pro Logic works with the audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
Before selecting Dolby Pro Logic II mode, connect your external device to the AUDIO INPUT jacks
(L and R) on the product. If you connect to only one of the inputs (L or R), you cannot listen to surround
sound.
The Pro Logic II function is only available in Stereo mode.
The Pro Logic II function is not available while playing AC3 signal in 2.1 channel mode.
~
~
✎
`
~
~
✎
`
`
`
~
✎
`
`
`
`
`
Operation