Press the button on the remote control.
Each time you press this button, will be selected in turn.
The P.BASS function provides a bass boost to reinforce the low frequencies.
The P.BASS function is only available with 2 channel LPCM sources such as MP3, DivX, CD and
WMA.
The P.BASS function does not work with Dolby Pro Logic ll modes.
If you press P.BASS in the DSP/EQ mode, the DSP/EQ mode is automatically shut off and the
P. BASS function will be turned on.
You can also press the button on the remote control and use the _ or + buttons to
adjust the level of subwoofer.
You can set the between -6 and +6. Set it to the optimal status.
~
✎
`
`
`
`
~
To Next Page
Loading...
