Health & Safety 135
Health & Safety
Before a new model device is available for sale to the public, it must be tested and certied to the FCC that it does not exceed
the SAR limit established by the FCC. Tests for each model phone are performed in positions and locations (e.g. at the ear and
worn on the body) as required by the FCC. For body-worn operation, this phone has been tested and meets FCC RF exposure
guidelines when used with an accessory that contains no metal and that positions the mobile device a minimum of 1.5 cm
from the body.
Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The FCC has granted an Equipment
Authorization for this mobile device with all reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines.
The maximum SAR values for this model phone as reported to the FCC are:
Head: 0.86 W/kg
Body: 0.86 W/kg
The SAR information for this device can also be found on Samsung’s website: www.samsung.com/sar.
SAR information on this and other model devices can be accessed online on the FCC’s website through http://transition.fcc.
gov/oet/rfsafety/sar.html. To nd information that pertains to a particular model, this site uses the device FCC ID number
which is usually printed somewhere on the case of the device. Sometimes it may be necessary to remove the battery pack to
nd the number. Once you have the FCC ID number for a particular device, follow the instructions on the website and it should
provide values for typical or maximum SAR for a particular phone. Additional SAR information can also be obtained at
www.fcc.gov/encyclopedia/specic-absorption-rate-sar-cellulartelephones.
To Next Page
Loading...
Need help?
General
