Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
TV Side Panel
_ S-Video CaMe (Not supplied)
Camcorder
> Each Camcorder has a different back panel configuration.
> When connecting a Camcorder, match the color of the connection terminal to the cable.
> We recommend the use of cables with a Ferrite Core.
1.
2.
Connect a Video Cable
(or S-Video Cable) between
theAV IN 2 [VIDEO]
(or S-VIDEO) jack on the
TV and the VIDEO OUT
(or S-VIDEO OUT ) jack
on the camcorder.
Connect Audio Cables
between the AV IN 2
JR-AUDIO-L] jacks on the
TV and the AUDIO OUT
jacks on the camcorder.
Connecting a DVD Player/Set-Top Box
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
DVD Player/Set-Top Box
[_7 Component Cable (Not supplied)
TV Rear Panel
1, Connect a Component
Cable between the
COMPONENT IN 1 or 2
[Y, PB,PR]jacks on the TV
and the COMPONENT
[Y, PB,PR]jacks on the
DVD player.
2, Connect Audio Cables
between the COMPONENT
IN 1 or 2 JR-AUDIO-L] jacks
on the TV and the AUDIO
OUT jacks on the DVD
player.
>_ Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red)
for enhanced video quality.
Be sure to match the component video and audio connections.
For example, if connecting the video cable to COMPONENT IN 1, connect the audio cable to
COMPONENT IN 1 also.
_- Each DVD player/STB has a different back panel configuration.
:_ When connecting a DVD player/STB, match the color of the connection terminal to the cable.
> We recommend the use of cables with a Ferrite Core.
English- l I
To Next Page
Loading...
