Auto Volume
Each broadcasting statkm has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed.
"Auto Volume" automatically adjusts the wflume of the desired channel by lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation signal is low.
Press the MENU button. Press the 4 or 1_ button to select "Sound",
then press the ENTER C:_ button.
Pressthe-,or,,,buttontoselect"AutoVolume",thenpressthe
........................................ENTER _ button.
Press the A or v button to select "Off' or "On", then press the
ENTER _ button.
Select "Return" by pressing the A or ",v button, then press the
ENTER_ button to return to the previous menu.
Press the EXIT button to exit.
English-55
To Next Page
Loading...
